經濟型水式模溫機
ETW-3600L水式模溫機特點:
ETW-3600L水式模溫機技術參數
型號Model | ETW-75L | ETW-200L | ETW-600L | ETW-1200L | ETW-1800L | ETW-2400L | ETW-3600L | |
使用媒體 Mediu mapplied | 清水 | |||||||
冷卻水量?Cooling?water?quantity | 約0.05Mpa(0.5kgf/C㎡)~0.39Mpa(3.0kgf/C㎡),10L/min以上 | |||||||
溫度控制范圍℃ | L型ModelL:1200℃、M型ModelM:150~180℃ | |||||||
Teperature?control?scope | ||||||||
水 | 電機功率kw?Power?of?motor | 0.37 | 0.75 | 0.75 | 1.5 | 1.5 | 2.2 | 2.2 |
? | zui大壓力mpa?Max.pressure | 0.2 | 0.3 | 0.3 | 0.38 | 0.38 | 0.35 | 0.35 |
泵 | zui大流量L/min?Max.flow | 70 | 100 | 100 | 280 | 280 | 350 | 350 |
加熱功率kw?Heating?power | 3 | 6 | 9 | 12 | 18 | 24 | 36 | |
溫度調解Temperature?adjustmen | 加熱.冷卻PID/Heating&cooling?PID | |||||||
? | 電源逆相、水泵過負荷、傳感器異常、媒體不足、過溫報警、加熱不良等/ | |||||||
報警功能??Alarm?functiont | Counter?phase?of?,over-load?of?water?pump,abnormal?sensor,insufficient?medium,ouer?temperature?alarm,bad?heating,etc. | |||||||
液體檢知器??Liquid?tester | 浮子開關或:(壓力開關)Float?switch?or?pressure?switch | |||||||
? | 冷卻水入口Entrance?of?cooling?water | 1/2B﹡1軟管接頭+過濾器Soff?pipe?joint+Filter | ||||||
配 | 冷卻水出口Exit?of?cooling | 1/2B×1 | ||||||
管 | 媒體送出口Exit?of?medium | 3/8B×2球閥 | 3/8B×2球閥 | 3/8B×4球閥 | 1/2B×4球閥 | 1/2B×4球閥 | 1/2B×6球閥 | 1/2B×6球閥 |
媒體返回口Rutum?entrance?of?medium | 3/8B×2球閥 | 3/8B×2球閥 | 3/8B×4球閥 | 1/2B×4球閥 | 1/2B×4球閥 | 1/2B×6球閥 | 1/2B×6球閥 | |
外形尺寸?mm??Dimension | 550×273×480 | 550×273×600 | 550×273×720 | 700×300×725 | 800×400×900 | 800×400×1000 | 800×400×1000 | |
機器重量?kg??Weight?of?machine | 30 | 50 | 80 | 120 | 130 | 140 | 140 |
水式模溫機,模溫機,水溫機,模溫機價格,模溫機特點